Cyclades PM IPDU User Manual
Page 39
Chapter 3: Configuration
27
After the upgrade command is executed, the boot loader menu is displayed at the console, as
shown below:
3.
At the boot loader menu, select option 1 to upgrade the firmware.
The boot loader erases the firmware currently in the unit and asks you to upload the new
firmware, as shown below:
4.
Use your terminal emulator program to upload the Cyclades PM IPDU firmware file to the PM
IPDU using the Xmodem protocol.
To use HyperTerminal in Windows:
1.
From the top menu select Transfer-Send.
The Send File pop-up window appears.
pm>upgrade 1
-----------------------------
Copyright (c) 2003 Cyclades Corporation
AlterPath PM/KVM Boot Loader Version 1.1
-----------------------------
Boot Menu
1. Upgrade Firmware.
2. Boot Firmware.
-----------------------------
Enter choice (1 or 2): 1
-----------------------------
Copyright (c) 2003 Cyclades Corporation
AlterPath PM/KVM Boot Loader Version 1.1
-----------------------------
Boot Menu
1. Upgrade Firmware.
2. Boot Firmware.
-----------------------------
Enter choice (1 or 2): 1
Erasing firmware...done.
Downloading image. Please send file in 10 seconds.