Cyclades PM IPDU - Manual (Page 63)

Chapter 4: Command Line Interface 51
Examples
To change the password for user alpha, when logged in as admin, enter the following.
To change the admin password (must be logged in as admin), enter the following
To change the password of a regular user when logged in as that user, enter the following.
reboot
The reboot command reboots a PM IPDU. You may reboot a specific unit by issuing the reboot
command followed by the unit’s logical number or the unit’s ID. Issuing the reboot command
without a parameter reboots the first unit in a chain, not all the units in a chain. This command is
available to the admin user only.
Syntax
reboot [<IPDU#>|<IPDU_ID>]
Arguments
<IPDU#> IPDU number in a daisy chain
<IPDU_ID> Identification string previously set by the id command
pm>passwd alpha
Password:
Re-enter password:
Username/password set for user alpha.
pm>passwd
Password: <new password>
Re-enter password:
Username/password set for user admin.
pm>passwd
Password:
Re-enter password:
Username/password set for user alpha.