Cyclades PM IPDU - Manual (Page 65)

Chapter 4: Command Line Interface 53
restore
The restore command restores the configuration currently saved in flash. This command is
available to the admin user only.
Syntax
restore
Arguments
N/A
Examples
To restore the configuration currently saved in flash, enter the following.
save
The save command saves the current configuration in the flash device built in to all Cyclades PM
IPDU units. This command saves the username/password database and the specific information
pertaining to each outlet such as outlet name, outlet assignments, outlet state. This command is
available to the admin user only.
If you save your configuration to flash it will be restored after the next reboot. If you do not save
your configuration to flash you will lose it all after the next reboot.
Syntax
save
Arguments
none
pm>restore
1: Outlet turned on.
2: Outlet turned on.
3: Outlet turned on.
4: Outlet turned on.
5: Outlet turned on.
6: Outlet turned on.
7: Outlet turned on.
8: Outlet turned on.