Cyclades PM IPDU - Manual (Page 67)

Chapter 4: Command Line Interface 55
To display the status of all outlets, enter the following.
syslog
The syslog command displays or changes the syslog notification status. This command is available
to the admin user only.
Syntax
syslog on|off|status
Arguments
on Enables message to be displayed in the console when there is an over current situation
off Disables the message notification
status Displays the current syslog status of all PM IPDUs on the daisy chain
no argument Same as status
Examples
To get the current status of the syslog notification, enter the following.
pm>status all
Outlet Name Status Interval (s) Users
1 g1 Unlocked ON 0.00 gregg
2 g2 Unlocked ON 2.40 gregg
3 g3 Unlocked ON 0.00 gregg
4 g4 Unlocked
ON 2.40 george, sarah
5 g5 Unlocked
ON 2.40 mila, sarah
6 g6 Unlocked
ON 2.40 george, sarah
7 g7 Unlocked
ON 0.50 george, sarah
8 g8 Unlocked
ON 0.50 mila, sarah
pm>syslog
Syslog is ON on IPDU #1
Syslog is ON on IPDU #2