Cyclades PM IPDU User Manual
Page 61
Chapter 4: Command Line Interface
49
off
The off command turns an outlet or group of outlets off. This command works on outlets in a PM
IPDU daisy chain.
Syntax
off all|<outlet_string>
Arguments
all
Turns off all outlets in the PM IPDU or PM IPDU daisy chain
<outlet_string>
Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
CAUTION: The “all” argument will turn off all outlets in a PM IPDU or PM IPDU daisy chain.
Examples
To turn all outlets off, enter the following.
To turn off outlets 2 through 7 (or all outlets except 1 and 8 in a single PM8 IPDU), enter
the following.
pm>off all
1: Outlet turned off.
2: Outlet turned off.
3: Outlet turned off.
4: Outlet turned off.
5: Outlet turned off.
6: Outlet turned off.
7: Outlet turned off.
8: Outlet turned off.
pm>off 2-7
2: Outlet turned off.
3: Outlet turned off.
4: Outlet turned off.
5: Outlet turned off.
6: Outlet turned off.
7: Outlet turned off.