Cyclades PM IPDU - Manual (Page 52)

40 Cyclades PM IPDU Installer/Administrator/User Guide
Examples
To delete the user rog, enter the following.
display
The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of
this command is to allow a PM IPDU to be mounted upside-down. This command is available to
the admin user only.
NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.
Syntax
display [<IPDU#>|<IPDU_ID> [0|180]]
-or-
display
Arguments
no argument show display status of all PM IPDUs in the daisy chain
<IPDU#> number of the PM IPDU in the chain
<IPDU_ID> Identification string previously set by the id command
0 normal mode (default)
180 inverted display
Examples
To set the display if IPDU #2 to inverted mode, enter the following.
To set the display of IPDU #1 to normal mode, enter the following.
pm>deluser rog
Username deleted.
pm>display 2 180
IPDU #2: Display mode set to 180 degrees rotated.
pm>display 1 0
IPDU #1: Display mode set to normal.