Cyclades PM IPDU - Manual (Page 51)

Chapter 4: Command Line Interface 39
To cycle multiple outlets, enter the following.
dbsync
The dbsync command synchronizes the user database for all PM IPDUs in the chain. This
command is available to the admin user only.
Syntax
dbsync
Arguments
none
Examples
To synchronize the user database for all PM IPDUs in the chain, enter the following.
deluser
The deluser command deletes one username from the internal database. This command is available
to the admin user only.
Syntax
deluser <user>
Arguments
<user> Desired username
pm>cycle 2, 3, 5-7
2: Outlet turned off.
3: Outlet turned off.
5: Outlet turned off.
6: Outlet turned off.
7: Outlet turned off.
2: Outlet turned on.
3: Outlet turned on.
5: Outlet turned on.
6: Outlet turned on.
7: Outlet turned on.
pm>dbsync
pm>Synchronizing user database in IPDU #2.