Sony PCV-230 - Manual (Page 62)

Other AudioView Functions—Edit and Transforms Menus
Action
Insert silence (dead or flat spot)
Copy a file to the Clipboard
Save contents of the Clipboard
to a file
Combine (mix) two sounds by
copying one sound over the
other
Locate and display the highest
volume level (amplitude)
within a selected segment
Change positive amplitude
values to negative, and vice
Procedure
Open the Edit menu and select Insert Silence.
Open the Edit menu and select Load File into
Clipboard.
Open the Edit menu and select Save
Clipboard, and then specify the file name.
Copy or cut a segment, select a segment in
the file you want to mix, and then open the
Edit menu and select Mix Paste.
Open the Transforms menu and select
Find Peak.
Open the Transforms menu and select
Invert Samples.
Center the display for a sound
recorded with an offset or
adjust the offsets of a file after
cutting and pasting data from
different files
Paste a selected segment
backwards -
Fade out the current file, fade in
the data currently in the
Clipboard, and then combine
the sounds
Reduce a sound’s sample rate
by 50 percent
Convert a 16-bit file to 8-bit
format
Change a stereo file into a
mono file
Convert an 8-bit PCM WAV file
to Sound Blaster® VOC format
Convert a VOC file to 8-bit
PCM WAV format
Change the sample rate
Open the Transforms menu and select
DC Offset.
Open the Transforms menu and select
Reverse.
Open the Transforms menu and select
Crossfade.
Open the Transforms menu and select
Flalve Sample Rate.
Open the Transforms menu and select
16 8 Bits.
Open the Transforms menu and select
Stereo Mono.
Open the Transforms menu and select
WAV ^ VOC.
Open the Transforms menu and select
VOC ^ WAV.
Open the Tranforms menu and select
Change Speed.
For additional information about how to use these functions, see the online help.
54