Replacing the theta controller fuses, Replacing the theta controller fuses -21 – Dynojet 224: Pit Eddy Current Brake User Manual
Page 25
E D D Y C U R R E N T B R A K E I N S T A L L A T I O N
Eddy Current Brake Installation
Version 2
Model 224 Pit Eddy Current Brake Installation and User Guide
1-21
R
EPLACING
THE
T
HETA
C
ONTROLLER
F
USES
Hazardous voltage. To avoid risk of electrical shock, disconnect the battery and
unplug the dyno.
1
Remove the nine button-head screws securing the deck assembly and set aside.
2
Remove the deck assembly and set aside.
3
Gently push the fuse holder slightly inward and rotate counterclockwise. Remove
the fuse holder.
4
Replace the fuse with a fuse type listed below.
For continued protection against risk of fire, replace only with a fuse of the
same type and having the same electrical rating.
• Buss P/N BAF-25, 25A Fuse
• Fast Blow, Dynojet P/N 54212501
5
Replace the deck assembly using the nine button-head screws removed earlier.
Refer to Figure 2-10 on page 2-10.