Dynojet 224: Pit Eddy Current Brake - Manual (Page 59)

P O W E R R E Q U I R E M E N T S — E X C L U D I N G N O R T H A M E R I C A
Power Requirements and Installation
Version 2 Model 224 Pit Eddy Current Brake Installation and User Guide
B-3
I NSTALLING THE W ALL R ECEPTACLE
The wall receptacle is a single 240 volt 30A dedicated circuit with a ground.
The cable carrying the power to this receptacle should be 4.0 mm
2
(ten gauge) or
larger. Check with local building codes for the correct size.
1
Connect one of the 240V legs to the N terminal (white).
2 Connect the other 240V leg to the L terminal (no color).
3 Connect the ground conductor to the green terminal.
Figure B-1: Wiring the Wall Receptacle
N terminal
(white)
L terminal
ground terminal
(green)