EFCO Sliding Glass Door User Manual
Page 10
Advertising
EFCO CORPORATION 6/8/2012 PART NO. YW41
Page 10 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
2. Seal sliding door head to the building substrate. The seal joint along the head is to marry in
with the seal joint down the jamb as shown. (Fig. G & H)
Sealant
Sealant
Fig. “H”
Marry sealant at
head and jamb.
Building Substrate
Fig. “G”
S-3014 Shown
S-3005 & S-3015 Similar
The S-3014, S-3015, & S-3005 require
an access hole to be drilled prior to
fastening the anchor (by the Erector).
S-3001 Shown
S-2000/3000 Similar
Sealant
Sealant
Blocking by
Erector
High Impact Shim
by Erector
Access Hole
Erector to Field
Drill for Anchors
Advertising