EFCO Sliding Glass Door User Manual
Page 13
EFCO CORPORATION 6/8/2012 PART NO. YW41
Page 13 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
3. Subheads to be field cut to length and installed.
ERECTOR NOTE: Two-piece and one-piece subheads will seal the same. (Fig. J)
Sealant
Erector to Field
Drill for Anchors
Sealant
Fig. “J”
Backbed the Sliding Glass Door to
subhead contact area with silicone sealant
before installing the door or cap seal after
the door is installed.
When preparing subframe for anchorage into the building opening please
make note of plumb line alignment of subhead to subsill as shown in
examples below.
Plumb Line
Example for:
Series 3014, 3015, 3005
sliding glass doors and
2900, 3016, 3017 fixed
windows.
Example for:
Series 5XP sliding glass
doors and 5XF fixed windows.