EFCO Sliding Glass Door User Manual
Page 52
EFCO CORPORATION 6/8/2012 PART NO. YW41
Page 52 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
Locate 3197 and 3498 jambs.
Adhere H064 head gaskets and H063 sill gaskets to the jambs.
Gaskets have a pressure sensitive adhesive on one side of the gasket. Match up the holes in the gasket
with the holes in the jambs and adhere to the jamb.
Locate the head and sill. Fasten the head and sill to the jambs with SLQ7 screws (#10-16 x 1 ¼” HW SMS
410 B-LP MG).
Anchor the doorframe into the opening.
For proper door operation, position the doorframe in the opening by using shims as needed to ensure that
the frame is plumb, square, and level without warp, twist, or bow.
Head
Jamb
Jamb
Sill
3887
Threshold
3880
3933
H063 Gasket
(Adhere to Jamb)
H064 Gasket
(Adhere to Jamb)
Interior
Exterior