EFCO Sliding Glass Door - Manual (Page 45)

EFCO CORPORATION 6/8/2012 PART NO. YW41 Page 45 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
Once the fixed panel is
installed, seal the meeting rail
to the frame, at this location.
Do this at the head and sill.
Locate 3499 jamb cover and snap-in place after
anchoring the jamb. (This can be done at anytime after
the door jambs are anchored.)
The 1 1/16” dimension must be obtained to ensure
proper embedment of the fixed panel; thereby, ensuring
proper interlock of the meeting rail.
1 1/16”