Rice Lake 320IS Plus Intrinsically Safe Digital Weight Indicator - Installation Manual - Manual (Page 54)

48 320IS Plus Installation Manual
Command Description Values
REGULAT Regulatory compliance NTEP, OIML, CANADA, NONE
REGWORD Regulatory word GROSS, BRUTTO
CONSNUM Consecutive number 0–999 999
CONSTUP Consecutive number start-up value 0–999 999
PWRUPMD Power up mode GO, DELAY
SAMPSIZ Sample size 5, 10, 20, 50, 100, PCWGT
CNTMOD Count mode access DISABLE, ENABLE
UID Unit identifier 000000–999999
STNDBY Standby 0-255
DATEFMT Date format MMDDYY, DDMMYY, YYMMDD, YYDDMM
DATESEP Date Separator SLASH, DASH, SEMI
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
Table 5-7. PROGRM EDP Commands
Command Description Values
GFMT Gross demand print format string See Section 6.0 on page 53 for detailed information
NFMT Net demand print format string
SPFMT Setpoint demand print format
string
CFMT Count demand print format
Table 5-8. PFORMT EDP Commands
Command Description Values
SETPOINT Setpoint number 1-8
KIND Setpoint Kind GROSSSP, NETSP,ACCUM, +RELSP, -RELSP,
%RELSP, RESREL, PAUSE, DELAY, WAITSS,
COUNTER, AUTOJOG, COZ, INMOTON,
INRANGE, -GROSS, -NET, BATCHPR, TIMER,
CONCUR
VALUE Setpoint value number
PSHTAR Push tare OFF, ON
PSHPRN Push print OFF, ON, WAITSS
PSHACCM Push accumulate OFF, ON, NQUIET
TRIP Trip HIGHER, LOWER, INBAND, OUTBND
BANVAL Band value number
HYSTER Hysteresis number
ALARM Alarm OFF,ON
PREACT Preact OFF, ON, LEARN, FLOW
PREVAL Preact value number
BATCH Batch step enable OFF, ON
ACCESS Setpoint access ON, OFF, HIDE
Table 5-9. SETPNT EDP Commands