Rice Lake 320IS Plus Intrinsically Safe Digital Weight Indicator - Installation Manual - Manual (Page 61)

320IS Plus Installation Manual - Print Formatting 55
6.2.2 Using the Front Panel
If you have no access to equipment for communication through the EDP port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 6-1 on page 55) to customize the print
formats.
Using the PFORMT menu, you can edit the print format strings by changing the decimal values of the ASCII
characters in the format string.
Lowercase letters and some special characters cannot be displayed on the 320IS Plus front panel (see the
ASCII character chart on Table 8-4 on page 64 and Table 8-5 on page 65) and are shown as blanks. The
320IS Plus can send or receive any ASCII character; the character printed depends on the particular ASCII
character set implemented for the receiving device.
Figure 6-1. PFORMT Menu
6.2.3 Using Revolution®
The Revolution configuration utility provides a print formatting grid with a tool bar. The grid allows you to
construct the print format without the formatting commands (<NL> and <SP>) required by the front panel or
EDP command methods. Using Revolution, you can type text directly into the grid, then select weight value
fields from the tool bar and place them where you want them to appear on the printed ticket.
Figure 6-2. Revolution Ticket Editor
Note
GFMT
Display first 6
characters of format
(See Note)
NFMT
Display and edit
active character and
ASCII value
Delete active
character
Scroll right in format string Scroll left in format string
Incr ement ASCII value of active character Decr ement ASCII value of active character
Pr ess to insert a space
befor e the active character
XXXXXXX XXXXXXX XXXXXXX XXXXXXX VERS ALGOUT DIGIN PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT XXXXXXX SETPNT
Same as GFMT
SPFMT
Same as GFMT
NOTE: To change the active character,
use the numeric keypad to enter the new
ASCII value and press Enter (TARE).
Same as GFMT
CFMT