4 customizing print formats, 1 using irev, Using irev – Rice Lake 920i USB Installation Manual V5.05 User Manual
Page 76
70
920i Installation Manual
7.4
Customizing Print Formats
The following sections describe procedures for customizing print formats using the iRev 4 configuration utility,
serial commands, or the front panel (PFORMT menu. See Section 11.6 on page 118 for information about custom
stream formatting.
7.4.1
Using iRev
The iRev 4 configuration utility provides a ticket formatting grid with a tool bar. The grid allows you to construct
the ticket format without using the formatting commands (<NL> and <SP>) required by the front panel or serial
command methods. Using iRev 4, you can type text directly into the grid, then select weight value fields from the
tool bar and place them where you want them to appear on the printed ticket.
Figure 7-1 shows an example of the iRev 4 print formatting display.
Figure 7-1. iRev Print Formatting Display
HDRFMT1
HDRFMT2
COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST ZIP<NL2>
Must be inserted into other print format
AUXFMTxx
GROSS<G><NL2><TD><NL>
Formats AUX1FMT—AUX20FMT
AUDITFMT
Fixed format; cannot be edited
Press PRINT when audit trail is displayed, or in
response to a DUMPAUDIT serial command.
Note
In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare
weight. When using Version 3 of iRev with older indicator software, the single auxiliary format (AUXFMT) is
handled as AUXFMT1.
Format
Default Format String
Used When
Table 7-3. Default Print Formats