Rice Lake 920i USB Installation Manual V5.05 - Manual (Page 77)

Print Formatting 71
7.4.2 Using the Front Panel
If you have no access to equipment for communication through a serial port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 7-2 on page 71) to customize the print
formats.
GFMT NFMT ACCFMT SPFMT TRWIN TRWOUT TRFMT
See GFMT Menus
PORT FMT
format
HDRFMT1 HDRFMT2
format format
ALERT
SERV
Alert email
server
PHONE
Alert modem
phone
ALERT format ONLY
AUDITFMT
PORT 3
PORT 4
PORT 2
None
PORT
AUXFMT
Same as AUXFMT1
AUXFMT1 AUXFMT20
PORT 4
PORT 3
PORT FMT1
format
...
PORT 2
PORT 1
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O VERS
None
PORT 1
PORT 4
PORT 3
PORT 2
PORT 1
None
Figure 7-2. PFORMT Menu
Each print format can be edited from the front panel using a character selection like that shown in Figure 7-3. Use
the navigation keys (
up , down , left , right ) to move around and between the format command line and the character
selection list.
Figure 7-3. Print Formatting Character Selection Display