2 temperature, Temperature – Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) User Manual
Page 12
Advertising
8 ScCMP Operator’s Manual
3.2.2
Temperature
A ScaleCore device will typically have a temperature sensor. The measured temperature is displayed on this
interface.
Figure 3-4. Data View – Temperature
Note
The temperature data will not be updated if the monitor is not enabled from the Edit menu.
Parameter
Description
Sensor ID
Typically 8 for temperature sensors.
Status
Current status of the sensor.
Value
The measured temperature value.
Units
The current units of measure for temperature.
Table 3-2. Temperature Parameters
Advertising
This manual is related to the following products: