Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) - Manual (Page 23)

Advanced Configuration 19
6.0 Advanced Configuration
The advanced view provides complete list of all features and parameters within a ScaleCore device.
Note
Before making changes to a ScaleCore device, it is advised that you capture the current device configuration to
the ScCMP database or a separate file. This way if any configurations are applied that are not wanted or not
fully understood, the original device configuration can always be reloaded and restored. For details of how to do
this, see Section 7.0 on page 32.
6.1 Device/Product
The device and product information provides system identification and configuration details.
Figure 6-1. Configuration View - Device/Product
6.1.1 Parameters
Table 6-1. Device/Product Parameters
Parameter Description
Device
Device ID
Device communications ID number for networking. Typically a value of 0 for scales and a value other
than 0 for indicators.
User Model Code A user defined model code. Typically used to index custom systems.
User Model Name
A user defined model name. Value may appear on scale display during test sequence. Name length
is 6 excluded null char.
Device Serial Number Unique, embedded serial number of the ScaleCore processor board. Not editable.
Product Serial Number Serial number of the ScaleCore product.
Product
Product ID Product index range 0 to 255, followed by the identified product name.
Product Version Product version ID range from 0 to 255. Identifies sub classifications of a ScaleCore product.
Software Version Software version name identification string.
Build Date Software built date.
Build Time Software built time.