Rice Lake DWM-IV Weighmeter Series 9 Setup Manual - Manual (Page 31)

29
How to setup the current Date and Time :
The following are the sequence of date and time setups, just after the display count
down finished:
After “DATE” displayed about 1 second, enter the current date as fol lows:
After “TIME” displayed a bout 1 second, enter the current time as fol lows:
How to momentarily display the current Date and Time :
During the normal weighing operation, press [ Shift] then press [Enter]. The display
will show the current time (5 seconds) then will show the current d ate (3 seconds) as
shown in the following formats:
Ø Current Time Format “ HH.MM.SS”
Where: HH = Hour, MM = Minute, SS = Second
Ø Current Date Format “DD.MM.YY.W”
Where: DD = Day, MM = Month, YY = Year,
W = Day of week (0 = Sun, 1 = Mon, 2 = Tue, 3 = Wed, 4 = Thu, 5 =
Fri, 6 = Sat)
LED Display Description Data Range
YRS XX Enter the current Year XX = 00 to 67 for Year = 2000 to 2067
MON XX
Enter the current
Month XX = 1 to 12
DAY XX Enter the current Date XX = 1 to 31
LED Display Description Data Range
HRS XX Enter the current Hour XX = 0 to 23 (Setup as 24 Hour Format)
MIN XX
Enter the current
Minute XX = 0 to 59
SEC XX
Enter the current
Second XX = 0 to 59