Rice Lake DWM-IV Weighmeter Series 9 Setup Manual - Manual (Page 6)

4
Status Indicators
There are 7 LED indicators just below the 7-segment weight display with the
following functions.
STB – (Stable Indicator) Indicates there is no weight motion on the
weighing platform.
ZERO- (Center Zero Indicator) Indicates the weight is at center of zero.
NET-(Net Weight Indicator) Indicates the currently displayed weight is a
net weight (a tare value is active).
PRINT-(Print Indicator) Flashes to indicate a successful print
transmission.
Kg-(Kilogram Indicator) Indicates the current weight unit is kilograms.
Lb-(Pounds) Indicates the current weight unit is pounds.
LOW BAT-(Low Battery) Indicates the battery is low during battery
operation. In the setup mode, the blinking of this LED is an indication to
enter a numeric value.
Low Battery Indicator
Pound Unit Indicator
Kilogram Unit Indicator
Print Status Indicator
Net Mode Indicator
Zero Status Indicator
Stable Status Indicator