Basic weighing function – Rice Lake Entris, Sartorius Laboratory User Manual
Page 11
11
Basic Weighing Function
Features
– Tare the balance
– Printing weights
Preparation
t
Switch on the balance:
Press the e key
t
Tare the balance, if necessary:
Press the w key
y
If necessary, change the configuration
settings:
see the chapter entitled “Configuration"
y
If desired, load the factory settings:
see the chapter entitled “Configuration"
Additional Functions:
y
Switching off the balance:
Press e
Example
Simple Weighing
Step
Press key
Display | Printout
1. Switch on the balance
e
0.0 g
Self-test is performed,
followed by automatic
initial tare function.
2. Place container on weighing pan
+ 11.5 g
(in this example 11.5 g).
3. Tare the balance
e
0.0 g
4. Place sample in container
+ 132.0 g
(in this example: 132 g)
5. Print weight
r
N + 132.0 g