Rice Lake Entris, Sartorius Laboratory - Manual (Page 25)

Preparation
t Select the Weighing in percent application
in the menu:
see “Configuration"
t Set the following parameters:
Applic.ation programs
Percent Weighing in percent
DEC.PLCS Decimal places
none Decimal places
o 1 dec.pl. 1 decimal place
2 dec.pl. 2 decimal places
3 dec.pl. 3 decimal places
o = Factory setting
Printout: Weighing in percent
pRef 100 : Reference percentage
Wxx% 111.6 g : Reference weight for
selected reference
percentage xx%
Prc + 94.9 % : Calculated reference
percentage
25
Weighing in Percent
Display symbol: %
Purpose
This application allows you to obtain
weight readouts in percent which are
in proportion to a reference weight.
Changing the Reference Percentage
Activate function:
Press the b key
Select the desired reference (1 to 100):
In increments of 1: Press the b key
briefly
Increments of 10: Press and hold the
b
key.
The percentage is stored in battery-
backed memory.