Rice Lake IQ plus 590-DC Installation Manual - Manual (Page 23)

Configuration 19
3.2.4 Serial Menu
See Section 8.2 on page 34 for information about the IQ plus 590-DC serial data format.
Figure 3-7. Serial Menu
XXXXXXX XXXXXXX
EOLDLY
000000
number
BITS TERMIN BAUD
CR
9600
7ODD
7EVEN
8NONE CR/LF
4800
2400
1200
600
300
LFT
OFF
STREAM
INDUST
VERS PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT
19200
SERIAL Menu
Parameter Choices Description
Level 2 Submenus
BAUD 9600
19200
300
600
1200
2400
4800 Baud rate. Selects the transmission speed for the EDP port.
BITS 8NONE
7EVEN
7ODD Selects number of data bits and parity of data transmitted from the EDP port.
TERMIN CR/LF
CR Termination character. Selects termination character for data sent from the EDP port.
EOLDLY 0
number End-of-line delay. Sets the delay period, in 0.1-second intervals, from when a formatted line is
terminated to the beginning of the next formatted serial output. Value specified must be in the
range 0-255, in tenths of a second (10 = 1 second).
STREAM OFF
LFT
INDUST Selects whether continuous data output is streamed from the serial port. Select LFT for
legal-for-trade applications in which the streamed data must match the current displayed weight.
Select INDUST to stream the latest weight data, regardless of the value displayed.
See Section 8.2 on page 34 for information about the IQ plus 590-DC continuous data format.
Table 3-5. Serial Menu Parameters