Rice Lake MSI-8000HD Remote Display - Manual (Page 19)

User Defined Function Keys 15
3.10 Total Remote Devices
Pressing the Fx-ttL.rd key displays the summed weight of RF connected sensors.
Sensor summing must be enabled in the COMM Setup Menu. If the “Pairs” or “Both”
modes are enabled in the COMM setup menu, then pressing the
Fx-ttL.rd key will
scroll through the available combinations.
Note
It is a common setup to program F1 for SCAN and F2 for “ttl.rd” (Total
Remote Devices) to allow quick switching between individual channel
displays (with

) or the summed weight (with “ttL.rd”).
3.11 Tare
The Fx-Tare key is redundant in the MSI-8000HD since it has a permanent TARE key.
This was done for consistency across the ScaleCore based product line. There is no
need to program a function key to “TARE.”