Rice Lake MSI-8000HD Remote Display - Manual (Page 43)

Appendix 39
6.2 Error Codes
The ScaleCore Processor that is the heart of the MSI-8000HD detects errors and
generates error codes to aid in troubleshooting.
Table 6-2. Error Codes
Error Code Definition Comment
LcOFF LC Disabled A Load cell was not enabled
2CAL In Cal The system is in calibration mode.
Do not send commands unrelated
to calibration
unCAL Not Calibrated System has not been calibrated
Error
LoAd
Overload Load/Weight exceeds Set capacity
+9d, or load cell is damaged or
disconnected.
Error
UndLd
Underloaded Load/weight is more than 20%
negative, or load cell is damaged or
disconnected.