Rice Lake MSI-8000HD Remote Display - Manual (Page 8)

4 MSI-8000HD Operator’s Manual
The function keys (F1 znd F2) will be displayed as Fx-YYYY, when used to
describe it’s use.
x = function key number, 1 or 2..
YYYY = currently programed function for that key.
F1 and F2 can both be programmed to all available user functions.
If a function key does not work, it is probably because the connected Scale/Dyna-Link
is not setup to support the key.
Example:
If the Function key is set for TOTAL, you must also setup the TOTAL mode in the Setup
Menu of the target scale.
7 (cont) KILONEWTONS (kN) Annunciator – Indicates load display is in
kiloNewtons.
KILOGRAMS (kg) Annunciator – Indicates load display is in kilograms.
POUND (lb) Annunciator – Indicates load display is in pounds.
8 SETPOINTS – User programmable set points for overload warnings. Set
Points 1 and 2 are high brightness red LEDs
9 1234 – if the 8000HD has multiple sensors, the number indicates the sensor
being displayed. If more than one number is lit, then the sensors are being
summed.
Example – if both 1 and 2 are lit, then the weight displayed equals the sum
of sensor 1 and sensor 2.
10 DIGITS – Six 1.22 inch (31 mm) sunlight visible LCD load display.
11 POWER Key – Turns the unit ON and OFF.
When in setup mode, returns to the normal weight/load display without
storing the changes.
12 ZERO Key – Used to zero out residual load on the scale/Dynalink.
When in the setup mode, drops back one menu level.
At the root menu level, stores the changes and returns to load mode.
13 Tare Key – Removes the current load value and puts the system in to the
NET weight mode.
14 LOW BATT Annunciator – Indicators battery power is low.
Note
Item No Description