Smart Power Systems ER Series - Manual (Page 11)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 10 of 52
Table 1
MODEL OF
GENERATOR ER-6.2, ER-8 ER-10, ER-110
Oil Cooler
Dimensions (Core)
2.25”D x 12.5” W x 10.3” H
2.25”D x 22.6” W x 11” H
Fan
Voltage
Amperage 12 Inch Pusher
12 Volts DC
22 Amps 12 Inch Pusher
12 Volts DC
22 Amps
Filter 10 Micron 10 Micron
Hydraulic Oil
(recommended)
(alternate)
Maximum Viscosity
Op. Temp. range
(deg. F.)
Dexron III
ISO Approved Hydraulic Fluid
4600 SUS (1000mm2/S)
60 SUS (10mm2/S)
-13° F to 195° F
Dexron III
ISO Approved Hydraulic Fluid
4600 SUS (1000mm2/S)
60 SUS (10mm2/S)
-13° F to 195° F
Hoses
Motor Inlet
All Others JIC STD
3600 psi, SAE
1250 psi, SAE JIC STD
3600 psi, SAE
1250 psi, SAE
Fittings SAE SAE
Dry Weight
(without pump) ER-6.2 165 lbs
ER-8 185
lbs
ER-10 220 lbs
ER-110 220 lbs
Dimension of Tray Asm. 33 ¾” L x 15 ¾” W x 13 ¾” H
(Including Reservoir)
33 ¾” L x 15 ¾” W x 13 ¾” H
(Including Reservoir)
Ambient Operating
Temperature Range
0
F to 120F 0F to 120F
Table 1 (cont.)