Smart Power Systems ER Series - Manual (Page 51)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 50 of 52
3.
Disable the generator Pump Set option.
After the pump has been properly adjusted, disable the Pump Set option by
performing the following steps:
Step a: Hold Mode until
Amps Line 1 Blinks 88.
Release switch so 0Pt
appears.
Step b: Press mode twice
to make PSEt appear.
Step c: After selecting
PSEt, Press On/Off
until n appears.
Disabling pump set option
Figure 32
a. Press and hold the Mode switch until the Amps Line 1 field blinks with 88 (more
than 10 seconds). Release the switch while the Amps Line 1 field is blinking to
make 0Pt appear. Reference Figure 32.
b. Press the Mode switch until PSEt appears.
c. Press the On/Off switch until an n appears, indicating Pump Set option is
inactive.
d. Put system into Normal mode by pressing the Mode switch.