Smart Power Systems ER Series - Manual (Page 29)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 28 of 52
Displayed Oil
Temperature in degrees
Fahrenheit
Example of oil temperature display
Figure 16
b. When the Command & Control Center is in Normal mode, pressing the Mode
switch twice will cause the amount of time since the oil filter was last changed to
be displayed (reference Figure 17):
Time Since last Oil Filter
Change in Hours.
Example of oil filter run time display
Figure 17
c. When the Command & Control Center is in Normal mode, pressing the Mode
switch three times will cause the configuration of the generator system controller
to be displayed. The “En” indicates the controller is configured to run an
enclosed generator, and the number displayed corresponds to the maximum
power output of the generator in kilowatts (reference Figure 18).