Setting up the tripod, Centring with laser plummet, coarse level-up, Measuring preparation 27 – Leica Geosystems TPS110C User Manual
Page 27
Advertising
Measuring preparation
27
TPS100z19
TPS100z32
TPS100z33
TPS100z57
TPS100z58
Setting Up the Tripod
1. Loosen the clamping screws
on the tripod legs, pull out to
the required length and
tighten the screws.
2. In order to guarantee a firm
foothold sufficiently press the
tripod legs into the ground.
When setting up the
tripod pay attention to a
horizontal position of the tripod
plate.
Heavy inclinations of the tripod
plate must be corrected with the
tribrach footscrews.
Careful handling of tripod
•
Check all screws and bolts
for correct fit.
•
During transport always use
the cover supplied.
•
Use the tripod only for
surveying tasks.
Advertising