Distance measurement, Measuring 33 – Leica Geosystems TPS110C User Manual
Page 33
Advertising
Measuring
33
Distance measurement
Pointing
Centre cross hairs of the
telescope to the middle of the
prism.
TPS100z100
Distance measurement
Triggers a distance
measurement and shows this on
the display. The displayed
distance remains valid until it is
replaced by a new distance
measurement.
Angles are displayed
independently of the distance
measurement.
Tracking mode
If the tracking mode is active
(refer to chapter
"EDM
Settings") the distance is
triggered continuously after
.
Stops the tracking
mode.
Changes to displays
with additional data
(e.g. Height
difference or
Coordinates)
Advertising