Laser intensity, Hints for positioning – Leica Geosystems TPS110C User Manual
Page 30
Advertising
Measuring preparation
30
Min.
50%
Max
TPS100z35
Laser Intensity
Changing the laser intensity
External influences and the
surface conditions may require
the adjustment of the intensity
of the laser. The intensity of the
laser plummet can be adjusted
in 25% steps as required.
The indicated laser intensity is
set, and the function terminated,
with the [OK] button .
Laser plummet and
electronic level are
activated together with
.
Hints for Positioning
Positioning over pipes or
depressions
In some circumstances, the
laser spot is not visible (e.g.
over pipes). In this case, the
laser spot can be made visible
by placing a sheet of transpa-
rent material over the end of the
pipe.
Advertising