Electromagnetic compatibility (emc), continued – Leica Geosystems TPS110C User Manual
Page 89
Safety Directions
89
Electromagnetic Compatibility (EMC), continued
CAUTION:
Disturbances caused by
electromagnetic radiation
can result in the tolerance limits
for measurements being
exceeded.
Although the total stations meet
the strict regulations and
standards which are in force in
this connection, Leica Geosys-
tems cannot completely exclude
the possibility that the total
station may be disturbed by very
intense electromagnetic
radiation, e.g. near radio
transmitters, walkie-talkies,
diesel generators, power cables.
Check the plausibility of results
obtained under these conditions.
WARNING:
If the total station is
operated with connecting
cables attached at only one of
their two ends (e.g. external
supply cables, interface cables),
the permitted level of
electromagnetic radiation may
be exceeded and the correct
functioning of other instruments
may be impaired.
Precautions:
While the total station is in use,
connecting cables (e.g.
instrument to external battery,
instrument to computer) must
be connected at both ends.