Leica Geosystems TPS110C - Manual (Page 40)

Menu 40
Programs
Tie Distance
The application Tie Distance
computes slope distance,
horizontal distance, height
difference and azimuth of two
measured target points.
Polygonal Method:
TPS100z95
Procedure:
1. Determine first target point.
[MEAS] Starts measurement
to the target point.
2. Determine second target
point.
Proceed as with first target
point.
3. Result is displayed.
Brg Azimuth between
point1 and point2.
S dist Slope distance
between point1 and
point2.
H dist Horizontal distance
between point1 and
point2.
H diff Height difference
between point1 and
point2.
[NewPt1] An additional
missing line is
computed. Program
starts again (at
point 1).
[NextPt2] Point 2 is set as
starting point of a
new missing line.
New point (Pt 2)
must be measured.