Panasonic Panafax UF-750 User Manual
Page 116
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
paper
y^hen a paper jam occurs in the transfer or the fuser area, the display will show the
information code “
002
”.
Remove
the document tray and the receiving paper tray. Open the front cover
' and
raise the clamshell by lifting the clamshell release lever. Check for paper.
If paper is in the transfer area, remove it.
2
. Check for paper in the fuser area. If paper is in the fuser area, open the exit paper
guide
unit by pulling the (green) knobs of it and open the fuser access cover by
depressing the (green) knob of it.
Then gently pull the paper backward.
CAUTION
B
* The fuser is hot, do not touch it.
• Avoid getting toner on your hands.
• Do not touch the yellow drum surface.
11
The (green) knobs of
the exit paper guide
Clamshell Release Lever (Green)
Clamshell
The (green) knob of
the fuser access cover
Exit Paper Guide Unit
Jammed Paper
3
,
Close the fuser access cover by lifting the knob of it and close the exit paper guide
unit. Then close the clamshell cover and the front cover.
113