Ex: i abbr | and [sirsl. or tel/dialir7ir7l[t, How to poll – Panasonic Panafax UF-750 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Poll
The following procedure lets you poll one station, or up to 100 stations. However,
if you want to poll two or more stations, you must use One-Touch dialling or
Abbreviated dialling numbers. Multistation polling does not require a Relay Station.
Be sure to set the polling password before polling (see page 70).
and
P O L L I N G
ENTER S T A T I O N ( S )
Dial by pressing a One-Touch key,
ABBR
and two digits, or TEL/DIAL
and a full number.
Ex:
I
ABBR | and [ s i r s l . o r
TEL/DIALir7ir7l[T
P O L L I N G
[ 3 5 ] ( S t a t i o n n a m e )
o r
P O L L I N G
7 7 7 2 3 4 5 |
To add more stations, use One-Touch
keys, or
ABBR and two digits.
Ex: One-Touch key
1
15
I
P O L L I N G
[ 1 5 ] ( S t a t i o n n a m e )
^ START
♦ D I A L L I N G *
[ 1 5 ] ( S t a t i o n n a m e )
NOT€
a
1
. To erase or change stations set in Steps 2 or 3, press CLEAR
several, use MODE or [T} to find the station you want.
Add new stations with One-Touch keys, or
If you recorded
Then press
CLEAR
ABBR and two digits.
2. If a polled station is busy, or does not answer, it will be skipped and the next station
will be polled. The skipped station(s) will be redialed up to five times after all registered
stations have been polled.
3. When polling ends, a Multistation Communication Journal is automatically printed out.
This journal lists the stations polled and indicates whether polling was successful or not.
72