Refilling or replacing the verification stamp, Or replacing the verification stamp – Panasonic Panafax UF-750 User Manual
Page 122
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Refilling
or Replacing the Verification Stamp
The verification stamp contains ink. When the stamp appears faded or hard to read,
the stamp should be refilied with ink or replaced.
1
, First, turn the power off. Open the Transmitting Guide Unit. Put your finger on
the edge of the stamp cover and pull it up. Then remove the Verification Stamp
Unit from the Stamp Holder.
11
£. (a) To refill the stamp with ink, refill the stamp by placing a few drops of specified
ink into it. Give the ink a few hours to spread. Make sure that ink does not
spiil from the stamp when it is turned over. Then reset the stamp unit.
CAUTION
If the power is turned off when the MEMORY LED is ON, document information stored
in memory will be erased.
119