Panasonic Panafax UF-750 - Manual (Page 99)

Journal Printout Explanation
( 1 ) Printout date
( 2 ) Printout time
(3) Communication number
(4) Communication result
(5) Number of pages
transmitted or received
( 6 ) Duration of communication
(7) Type of communication
( 8 ) Remote station identification
(9) Communication date
(10) Communication start time
(11) Diagnostic
(
12 ) LOGO
(13) ID number
(14) Dialling method
(15) Call back message
(16) Resolution
Day-Month-Year
HourrMinute
1 - 32 (Does not always begin with
1
when
printed out manually.)
“OK” indicates that the transmission was
successful.
“S-OK” indicates that STOP was pressed
during communication,
Three-digit information code (see page 108)
appears when there was a problem.
“M-OK” indicates that the document was
received alternately but has not been printed
out yet.
The two digit number is the number of
pages successfully transmitted or received.
When the Total Page function is activated,
two two-digit numbers will appear. The first
two-digit number represents the number of
pages successfully transmitted. The second
two-digit number represents the total number
of pages that were attempted to be
transmitted.
An asterisk indicates that the quality of
some received copies was poor.
Hour: Minute Second
“XMT” means Transmission
“RCV” means Reception
A name indicates station name recorded in
this machine. A number indicates remote
station’s ID number or Telephone number.
Group 2 , 3 indicates that the remote station
was a CCITT G2, G3 machine.
Day-Month
HouriMinute
For service personnel only
“T” indicates direct dialing or
One-Touch/Abbreviated dialing with no
recorded station name.
Appears when voice contact was requested.
STANDARD/FINE/SUPER FINE(see page 39).
96