Panasonic Panafax UF-750 - Manual (Page 138)

Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in your machine in accordance
with the Relay Network you belong to, you can send a document to two or more
stations in the network system, automatically, using the procedure below. The
operation is the same as Multistation Transmission.
1
2
Piace documents face down on the ADF.
Adjust the left and right Document
Guides.
Dial by pressing a Program key or
MEMORY/MULTIFILEI , and any
combination of One-Touch, F ab BR and
two digits, I TEiyPIAL
I
and a full number,
and a program keys.
Ex:
I
PI I and 1271
into the memory. Then it dials the Relay
Station and sends the document.
After the transmission ends, your
machine prints out a RELAY XMT
REPORT automatically and returns to
standby.
After the Relay Station finishes its
transmission to the end receiving
stations, your machine prints out a
RELAY XMT RESULT report sent back
by the Relay Station and returns to
standby.
12
DOCUMENT SET
ENTER S T A T I O N ( S )
DOCUMENT SET
[ P I ) ( P r o g r a m n a m e )
DOCUMENT SET
[ 2 7 1 ( S t a t i o n n a m e )
♦ STORE ♦ N 0 . 0 0 1
P A G E S « 0 1 0 1 %
* STORE * COMPLETED
T O T A L PAGES=:05 24%
* D I A L L I N G *
[ 0 1 ] ( S t a t i o n n a m e )
* P R I N T I N G *
COMM. JOURNAL
135