Installing developer unit – Panasonic Panafax UF-750 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installing Developer Unit
The developer unit contains developer for printing.
1
.
Open the protective bag by cutting the end of the bag. Remove the plastic bag,
inner pads and tapes.
2
,
Make sure that the top seal cap and the side seal cap are firmly fixed to the
developer unit. Then gently shake the developer unit several times horizontally
to even the developer level.
Top Seal Cap
Side Seal Cap
10
Advertising