Setting the dialling method (pulse or tone), Setting the dialing method (pulse or tone) – Panasonic Panafax UF-750 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialling Method (Pulse or Tone)
Your facsimile machine can operate with either one of two dialling methods (Pulse
or Tone), depending on the type of telephone line you are connected to.
Your facsimile machine is preset at the factory for Pulse Dialling. If your telephone
line requires Tone Dialling, set your machine to Tone Dialling using the following
procedure.
1
2
4
FUNCTION
and
^ START
Enter the two-digit Fax parameter
number.
Press [
t
] and I START
Enter the new setting value.
Press [T].
m changes to Pulse Dialling.
To return to Tone Dialling, press \2
NOTC
FAX PARAMETER
N O . » B
07 DIALLING METHOD
PULSE
08 RELAY XMT REQUEST
fl:VALID
15-DEC-1989 15:00
If you make a mistake to enter the Fax parameter number, press CLEAR I then
reenter the correct number.
34