Basic transmission settings, Basic transmission setting, Resolution – Panasonic Panafax UF-750 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC TRANSMISSION SETTINGS
You
can temporarily change seven basic settings (Resolution, Contrast, Halftone,
Total Pages,
Verification Stamp, Individual Transmission Journal and Error Correction
l^ode) before any ordinary transmission. These settings can be altered before or after
vou
place documents on the ADF. After you finish transmission, your machine wili
automatically
return to the preset settings. You can also change these settings during
transmission.
Resolution
Your
machine is preset to Standard resolution, which is suitable for ordinary
documents. Use FINE or Super-FINE for very detailed documents.
1
►
RESOLUTION
►
RESOLUTION
a
►
RESOLUTION
DOCUMENT SET
RESOLUT I O N . S T D
(STD = Standard)
DOCUMENT SET
R E S O L U T I O N - F I N E
If satisfied, go to Step 4.
DOCUMENT SET
RESOLUT I O N . S F I N E
(S FINE«Super-FINE)
To return to Standard, press
resolution
! again.
You can now dial by pressing
TEL/DIALI and a full number,
a One-Touch key, IABBRI and two
digits, or I REDIAL
NOT€
1. After changing the Resolution setting, you can
a) go to standby with [STOP
b) make a copy of the document to test the new Contrast setting by pressing COPY
c) start a different series of settings by pressing rRESOLUTION I, j HALF TONE
STAMP I, MODE
HE
. or
I
FUNCTION
2. To change the preset Resolution position, see page 30.
39