Memory transmission – Panasonic Panafax UF-750 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORY TRANSMISSION
The memory function allows you to perform easily many different tasks. If you wish,
you can store your documents into memory and then have the machine transmit the
stored documents. After transmission is completed, the stored documents are erased
automatically.
The advantages of memory transmission are:
1
. The same document can also be transmitted to multiple stations.
2. If communications fail when transmitting from the memory, your machine will
retransmit the remaining unsuccessful page(s) automatically.
NOTC
1
. When you use memory transmission, a Memory Transmission Journal {COMM.
JOURNAL) is printed out automatically after transmission. This report lets you verify
if the transmission was successful or not (see page 97),
2. Usually a memory allows you to store up to 20 pages of standard documents. If a
memory overflow condition occurs while storing document(s) into the memory, the
machine will start transmitting those pages which are successfully stored. If you wish
to cancel this transmission, press STOP and confirm on the display
MEMORY O V E R F L O W
I N F O . C O D E - 8 7 0
3. The File Number of the document being stored is shown at the upper right corner
of the display while storing takes place. It is also printed on the Memory Transmission
Journal (COMM. JOURNAL). The percentage of memory used is shown at the lower
right corner of the display after each page is stored.
* STORE ♦
NO. 003
P A G E S - 0 2
1 0
%
4. INFO. CODE = 633 will be displayed if there is no answer at the receiving side after
the last automatic redial. The document stored for this transmission will be erased
from the memory automatically and the Memory Transmission Journal (COMM.
JOURNAL) will be printed out stating the transmission is *‘INC" (Incomplete).
5. If a power failure occurs, the document information stored in the machine’s memory
will be lost. In this case the Power Failure Report will be printed out automatically
after the Power is turned ON again. The report is not printed out when there are no
documents stored in the memory.
54