Resetting the system – Yamaha HTR-5950 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RESETTING THE SYSTEM
Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the “SET MENU" parameters. However, the advanced setup
menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on this unit.
To cancel the initialization procedure at any lime without making any changes, press •STAN[)BY/ON on the Iront panel (or STANDBY
on the remote control) to set this unit to the standby mode.
1
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced .setup menu
appears in the front panel display.
While holding
down
3
Press PROGRAM <3 /1> on the front panel
repeatedly to select “PRESET”.
PROGRAM
4
Press STRAIGHT (EFFECT) on the front
panel repeatedly to select “RESET”.
Select “CANCEL” to cancel the initialization procedure
without making arty changes.
5
Press STANDBY/ON on the front panel to
confirm your selection and set this unit to the
standby mode.
97