Repeat steps 1 through 5 to store other, Selecting preset stations, Flashes – Yamaha HTR-5950 User Manual
Page 53: Preset station number, U.s.a. model), The displayed station has been stored as c3, Front panel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FM/AM TUNING
Press PRESET/TUNING/CH < /> to select a
preset station number (1 to 8) while the
MEI\/IORY indicator is flashing.
• Press C> to select a higher preset station number.
• Press <d to select a lower preset station number.
PRESET/TUNINQ/CH i:; -
Flashes
DVR V-AUX DTV/CBL DVD MD/CD-R P-TUSER,, I CD., XM
ti*ES «aaoiw
VOLUME
SP
- ui I if
Preset station number
Press MEMORY (MAN’L/AUTO FM) while the
MEMORY indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected. The MEMORY indicator
disappears from the front panel display.
Selecting preset stations
You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
(U.S.A. model)
When pertbrmiiig this operation with the remote coittrol, set the
component selector switch to SOURCE and then press TUNER
to select "TUNER” as the input source.
DVR V-AUX DTV/CBL DVD MD,'CD-B >TRNER CD XM
The displayed station has been stored as C3.
1 Press A/B/C/D/E on the front panel (or A-E/
CAT. < / > on the remote control) to select the
desired preset station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
Repeat steps 1 through 5 to store other
stations.
Notes
• Any sloreci station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
• The reception mode (stereo or monaural) is stored along
with the station frequency.
A/B/C/D/E
CATEGORVfi
Front panel
49