Yamaha HTR-5950 - Manual (Page 75)

SOUND FIELD PROGRAMS
Sound field parameter Features
F'RiJ UjiFie I r1i,.i:= i c-
F'RO imiC II
PflrlOl'iflrlij
I’r.' l!x M ikil ' II MlKio |'':inr‘|-;ini:i. ^к■|
speakers as well as the front speakers for a wraparound effect.
Choices:
OFF,
ON
' -.ieiials to the siiiroiind
FlPO UJ6IC II::< Plu:;:iic.
pm L..0GIC II
DlilEHSIOH
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards
the front or towards the rear.
Control rttnge: -3 (towards the rear) to +3 (toveards the front)
Iititial setting: STD (slaitdard)
F t < u L06IC II:«:
F t <0 LdJGIC: II
CEilTilF; WIDTFi
Pro Logic IIx Music and Pro Logic 11 Music center w'idlh. Moves the center channel output
completely towards the center speaker or towards the front left and right speakers. A larger value
moves the center chatmcl output towards the front left and right speakers.
Control rttngc: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
C:’T:5 Heoiifc. rlu
C= inijGE
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the
center channel to make the center channel more or less dominant as itccessary.
Control range: 0.0 to 1.0
Iititial setting: 0.3
The “PRO LOGIC IIx Music”. “PRO LOCilC II Music”, anti “DTS Neo:6 Music” parameters can be set only wdieti “SUR.
STANDARD” is selected. Set the component selector switch to AMP and then press STANDARD on the remote control repeatedly to
select “SUR. STANDARD” (see page 42).
71