Yamaha HTR-5950 - Manual (Page 105)

TROUBLESHOOTING
■ Tuner
Problem Cause Remedy
Seo
page
FM stereo reception is
The characlerislics of FM stereo
broadcasts may cause this problem
when the transmitter is loo far away or
the antenna input is poor.
Cheek Ihe antenna connections. 24
noisy.
Try using a high-quality direetional FM
antenna. —
Use Ihe manual tuning method. 46
FM
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference. Adjust the antenna position to eliminate
multi-path interference.
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is too weak. Use a high-quality directional FM antenna. —
Use the manual tuning method. 46
Previously preset
stations can no longer
be tuned into.
This unit has been disconnected for a
long period.
Set preset stations 47,48
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
conneetions are loose. Tighten the AM loop antenna connections
and orient it for Ihe best reception. —
Use Ihe manual tuning method. 46
AM There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment. Use an outdoor antenna and a ground wire.
This will help somewhat, but it is dilTicult to
eliminate all noise.
—
There are buzzing and
whining noises.
A TV set is being used nearby. Move this unit away from the TV set. —
■ XM Satellite Radio (U.S.A. model only)
If an operation takes longer than usual or an error occurs, one of the following messages maw appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Status mcssago Cause Remedy
See
page
............... . t I i'l,,.'
Tlk'. \M ( oiiiurd Jiul ]’l;iy iliyil;il ;iiik iiii;i
accessory is not connecied to the XM jack
of this unit or does not work properly.
(Ik'ck Hie ,\\] ( UniK-cl- and I’hiy iliyiial aiileiina
accessory connections and orient it for the best
reception level.
'll I 1 3 ¡'.M,,: The XM user encryption code is being
Lipdated- Wait until the encryption code is updaled.
The signal is too weak. Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception level. 52
It takes longer than four seconds for audio
or text data to be decoded.
Wait until the decoding process has rinished.
II m . U Ml t.,.' The XM Satellite Radio channel you
selected is not currently broadcasting any
signals.
Check Ihe channel number again or select another
XM Satellite Radio ehannel.
The Chiinnel Station ID (SID) is no longer
available.
No aitist name or song title is available.
No channels are available for the seleeted
category.
Select another channel category by pressing
CATEGORY on the front panel (or A-E/C^AT
K/y on
the remote control) repeatedly.
57
101