Yamaha HTR-5950 - Manual (Page 79)

SET MENU
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment,
■ Basic setup Bi-lEilC IBIET'UF-'
Use this feature to set up your system quickly and with minimal effort (see page 28).
■ Manual setup flMr-IUMl.... idiTUI"-'
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SijUNI) rllErii...!
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter Features Page
''j
r|j.;''|ru' 'lirp'r
Selects the size of each speaker, the speakers for low-frequency signal output, and the
crossover frequency.
78
i “ d i irj iilii'i Adjusts the output level of each speaker. 80
|“‘ ■'!
'!!!|
u' p!'[
'!ir "j" Tj j'
J ¡'“ |!!!'Adjusts the delay time of each speaker.
81
i'‘‘j
''j
t'lliirM Adjusts the tonal quality of the center speaker. 81
!:“ / LJ'"!:::. Adjusts the output level of tlie LFE channel for Dolby Digital or DTS signals. 81
|r
''j |'V.yMr|j'i'|
T i'“ pMiJpjjr Adjusts the dynamic range of Dolby Digital or DTS signals. 82
|"!j ■'! t"|| Ip!
T ¡"'i Adjusts the muring level, audio delay and tone bypass settings. 82
Input menu
2 IHF'UT i'
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Parameter Features Page
rV‘j
'1' ,.''P| ncpr
]'
LjUlvjp'j'.r'r Assigns the input/oulput jacks of this unit according to the component to be used. 83
|!!1|
■'!
|T ivjPjj'Sp Selects the initial input mode of the source. 84
P’
‘‘j
'1'
rr
l!!!ij!!!'kh"uvjp' Changes the name of the input source. 84
! !'s 1 f''! Adjusts the output volume of each jack. 85
75